logo

Silkn Flash & Go Lux + 6,000 Flashes

The Silk'n Flash & Go Lux makes skin silky smooth without uncomfortable ingrown hairs and razor burn.

Special Offer: We are supplying the Silk'n Flash&Go Lux with an
extra 5,000 flash head on top of the standard 1,000 flash head.

This is the equivalent of an extra 5 cartridges (which are worth £30 each).

Silkn Flash & Go Lux + 6,000 Flashes
FLASH_GO_PACKSHOT_SCHUIN (1) INNO_ESSENTIALS_11060025 0754 flash&go-283 INNO_ESSENTIALS_11060025 0792 Silk'n_Flash&Go_EU2
Estimated UK delivery date: Mon 6th Oct Free delivery

In stock and ready to ship

$324.65

Silk'n Flash&Go Lux is an innovative light-based device for permanent hair removal on the face and body. The new high tech design of the Flash&Go Lux applicator allows individuals to properly target and zone into any area that requires treatment.


Flash&Go Lux is ideal for individuals who want:
  • Comes with a 5000 flash head plus an additional 1000 flash head so is great value for money
  • Permanent riddance of unwanted face and body hair
  • Treatment for sensitive areas (bikini line) or smaller, targeted zones (upper lip)
  • Speed in treatment. Since the Flash&Go Lux plugs into the wall, the pulse speed ensures a quick treatment without worrying that your battery will die before you finish your session
  • Updated protocol for quicker results and increased efficency
  • Silky smooth skin without ingrown hairs and razor burn
  • An affordable solution to hair removal


Flash&Go Lux features:
  • Dermatologist recommended
  • Permanent removal of unwanted face and body hair with it's HPL technology
  • Treatment for sensitive areas (bikini line) or smaller, targeted zones (upper lip)
  • Plugs into the wall, the pulse speed ensures a quick treatment without worrying that your battery will die before you finish your session
  • Silky smooth skin without ingrown hairs and razor burn
  • Minimal discomfort compared to waxing or professional laser treatments
  • Easy to use
  • Cost effective: An affordable solution to hair removal
  • Convenient: Hair removal in the privacy of your home when it is convenient for you
  • Skin colour sensor scans the colour of the skin prior to treatment and will only pulse on skin that is suitable for treatment
  • Treatments are simple, quick and clean with minimal set up


Advantages of the Flash&Go Lux to the Sensepil:
  • Flash&Go Lux has an ergonomic head designed for the treatment of hard to reach and sensitive areas such as the bikini line, upper lip or any zone with curves that require a more targeted approach
  • Flash&Go Lux applicator spot size is 4 cm compared to the SensEpil spot size of 6 cm. This is still a very large spot size compared to competitors who are only 1 cm
  • Flash&Go cartridges hold 1000 flashes compared to the SensEpil which holds 750 flashes. For small areas, this is enough for the complete treatment series, but if you are using Flash&Go Lux on large areas, it is recommended that extra cartridges are purchased which are available from CurrentBody.com




Please note: Avoid Silk'n Flash & Go on naturally dark skin complexion or recently tanned skin.

Why buy this product?

  • Ergonomic head designed for the treatment of hard to reach and sensitive areas
  • Ideal for treating sensitive areas (bikini line) or smaller, targeted areas (upprer lip)
  • Skin Sensor detects "safe" skin tones

Comparison - Laser Hair Removal vs HPL


The technologies for home hair removal that currently exist and dominate the market are laser and intense pulsed light (IPL). Scientists and designers at Home Skinovations Ltd. have developed a newer innovative technology called Home Pulsed Light (HPL), which allows the benefits of the proven IPL technology to be used safely and effectively in an at-home environment. With two years of significant clinical results, HPL is a proven leader in the home hair removal market.

Both laser and IPL/HPL technologies generally use an intense beam of light for the removal of unwanted hair and based on the principle of selective photothermolysis. This is a selective manner of targeting pigment in hair shafts without damaging the surrounding skin when treating. Both technologies are equally applicable for women and men alike.

The Home Pulsed Light technology is highly superior and much more suitable for home use because of the following:


Safety:
HPL technology provides two levels of safety: a skin sensor to detect skin color to eliminate any possibility of burns and a skin-touch mechanism that allows the system to fire only when there is direct contact with the skin.

Superiority in wavelength:
HPL with its wide spectrum of light is good for a wide variety of hair colors. On the other hand, laser technology is based on a single wavelength of light, which is best suited for one hair color. Professional clinics that conduct laser hair removal usually use 2-3 different lasers with different wavelengths that enable them to treat a greater range of hair colors. HPL with its spectrum of wavelengths is suitable for a broader range of hair color, not confining efficacy.
If you were to consider wavelengths like a radio dial, lasers limit your ability so you could only tune into one station, while HPL allows you to use a range of stations, suited to your individuality.
HPL uses a low energy level with a high peak power to provide excellent hair removal results. On the other hand, laser hair removal uses a high level of energy which requires skin cooling with gel.

Spot size & speed of treatment:
HPL has a much larger spot size (6 sq cm) and a high repetition rate allowing you to treat both your legs in under 25 minutes. Lasers, with a smaller spot size (up to 1 sq cm) and the same repetition rate means your treatment time is much longer for the same area.

Discomfort:
HPL has a low energy level and a high peak power which allows for SensEpil hair removal to have no discomfort or that similar to a light elastic band. Laser hair removal has a higher energy level which may cause higher pain levels.

Facial safety:
Due to the low joules of energy emitted in each HPL pulse, it is allowed for use on the face. Studies conducted with HPL technology on more than 60 patients show very noticeable results on the face after approximately 4 treatments.

HPL ... Similar laser-like results... increased safety protection



HPL Technology

Light Based Hair Removal

The process of laser and light-based hair removal is well known and established. It has been proven in clinical use around the world for over 15 years as a safe and effective way to achieve permanent hair removal.

Light-based hair removal is based on the theory of selective photothermolysis in which optical energy is used to disable hair growth. In order to achieve such thermal effect, the hair shaft needs to selectively absorb light energy and transform it into heat. This selectivity is achieved when high optical energy that is delivered to the tissue is mostly absorbed by hair shaft pigment, while the epidermis and the surrounding tissue is actively cooled (by a cooling mechanism). Melanin is the pigment in the hair shaft that is responsible for the absorption of the light, which generates the heat that eventually disables hair growth. When hair growth is disabled, permanent hair removal is achieved.

Home Pulsed Light(HPL)


Silkn Flash & Go is a personal combined-energy based device for long-term hair removal. The Silkn Flash & Go is based on Home Pulsed Light (HPL) technology which is a proprietary and patented technology of Home Skinovations Ltd. Epilation with Home Skinovations' proprietary HPL technology is enhanced by a unique acoustic effect that improves the normal process of photoepilation, enabling permanent epilation with low level of optical energy without the need to cool the skin.



Hair Growth Cycle

Every hair in our body goes through the three phases of the hair growth cycle: Anagen, Catagen and Telogen. These phases have an important impact on how the process of light-based hair removal works.Anagen is the hair growth phase while Catagen and Telogen, are both resting phases.



The time it takes to complete a full hair growth cycle varies from person to person and the location of the hair on the body, and for some individuals it may take 18-24 months. At any given moment the majority of the hair follicles in any skin area are in the resting stages. These resting hairs cannot be effected by laser or light hair removal treatment. However hairs in the growing Anagen phase will respond. It is therefore important to understand that it may take a full hair growth cycle to achieve complete results when doing any energy based hair removal.
It is important to understand more about HPL and how it works on the skin. As with any light-based or laser hair removal device, results are not immediate and may take a few treatments. Hair may appear to be growing back after a treatment, but typically after two weeks many of these hairs will simply fall out. In addition, hairs grow in three different stages and only hairs in an active growth stage will be affected by a Silkn Flash & Go treatment. This is one of the main reasons that multiple treatments are required to achieve the desired result for any energy based treatment (whether at home or even in a clinic!)

Most people start to see noticeable results after four treatments, and great results after six treatments. Maintenance treatment are common after eight treatments to treat stray hairs that may have been in Telogen or Catagen phase or to treat patches of hairs that were missed in initial treatment.
In a two-year multi-center clinical study HPL Technology has been proven safe and effective for the treatment of facial hair. Silkn Flash & Go can be used for treating facial hair from the cheek line downwards. Extra caution should be made to avoid the eyes.

Sun Protection Is important

Extra care should be taken to avoid sun exposure before and after treatments with Silkn Flash & Go. Acceptable means of sun protection are covering garments or sunscreen (SPF higher than 50) used continuously for 3 weeks before and after treatment.

Do not use Silkn Flash & Go on naturally dark skin complexion

Silkn Flash & Go removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment also exist in the surrounding tissue of skin. The quantity of pigment in a particular persons skin, or your skin complexion, determines the degree of risk they are exposed to using Silkn Flash & Go hair removal device.
Consequently treating dark skin with Silkn Flash & Go and any other hair removal device, can result in adverse effects such as burns, blisters, and skin color changes (pigmentation changes.)
To address this issue, a unique SKIN COLOR SENSOR is embedded in the Silkn Flash & Go to measure the treated skin complexion at the beginning of each session and occasionally during the session. The SKIN COLOR SENSOR ensures that pulses will only be emitted on suitable skin tones taking the guess work out of treatment.